Glues, Varnish and Mediums

The adhesive C-200, also called polyvinyl acetate adhesive (PVA white glue), has a wide application. Suitable for gluing on absorbent surfaces such as: paper cardboard wood some types of textiles flour and other porous surfaces. Once dry, it becomes transparent and forms an elastic film, fire resistant, which makes it suitable for use as a varnish for decoupage technique. It is applied easily and conveniently with a brush, spatula or roller. It dries in half to 3 hours depending on the temperature and humidity. It is recommended to protect from freezing, the storage temperature should be above 5 ° С. Before applying the base is prepared by cleaning it of dust and other contaminants. It can be diluted with up to 5% water. For best results when gluing paper and cardboard, the glued surfaces can be clamped under a heavy object. Brushes and applicators used to spread the glue are cleaned with water while still wet.

High glossy water-based finishing varnish, it can be diluted with water. After drying it becomes water resistant. High glossy water-based finishing varnish, it can be diluted with water. After drying it becomes water resistant. Apply the varnish onto a decorated or cleaned surface with a second time too, when the first varnish layer is already completly dried.

Solvent - turpentine based. Turpentine based solvent for the PENTART liquid patina and the PENTART antique paste. It is recommended to wipe off the residue of antiquing agents and to clean the tools too.

Decoupage varnish and glue in one, with silky shine finish. Suitable for surfaces like wood, papier-mache, plastic, metal, MDF, polystyrene. Clean brushes after use with water.

A water-based transparent decorative varnish, which lends a metallic luster to the surface. Apply a thin layer of the effect varnish evenly to the surface of the item already decorated. Wait until the privious layers of warnish have dried completely before adding additional layers. Shake before use.

A water-based transparent decorative varnish, which lends a metallic luster to the surface. Apply a thin layer of the effect varnish evenly to the surface of the item already decorated. Wait until the privious layers of warnish have dried completely before adding additional layers. Shake before use.

Decoupage varnish and glue in one, with matte finish. Suitable for surfaces like wood, papier-mache, plastic, metal, MDF, polystyrene. Clean brushes after use with water.

Decoupage varnish and glue in one, with silky shine finish. Suitable for surfaces like wood, papier-mache, plastic, metal, MDF, polystyrene. Clean brushes after use with water.